Assembly of one PUA®:

1º Put a plastic strap over the joint with a double round and tight slightly to the first "click". (see drawing 1)).

2º Insert PUA® between tube and strape (see drawing 2) and tight (see drawing 3).

3º Put a plastic strap on PUA® with double round to the tube and tight (see drawing 4).

4º Cut the straps overlength (see drawing 5).

Important:

The plastic straps should be 350 mm length.

 


 

Assembly of two PUA®:

1º Put a plastic strap over the joint with a double round and tight slightly to the first "click" (see drawing 6).

2º Insert both PUA® between tube and strape, and tight (see drawing 7).

3º Put a plastic strap on both PUA® with double round to the tube and tight (see drawing 8).

4º Cut the straps overlength (ver drawing 9).

Important:

The plastic straps should be 350 mm length.

descargar en formato pdf Download de assembly instructions in PDF format.

 


drawing 1
drawing 2
drawing 3
drawing 4
drawing 5

 

drawing 6
drawing 7
drawing 8
drawing 9

 

ANDTEC Tel: +34600594393
email:andtec@andtec.net